FlipMods Mini board with a 3D printed case and has the ESP-WROOM-32. The ESP32 is used for Marauder applications and will come preloaded with Marauder.
The board plugs into the GPIO pins of the flipper zero. Designed to fit even if you’re using the official flipper zero silicone case on the device. Includes a pin cover.
There is a USB-C port on the board to use for the ESP32 so you could update the firmware.
No need to turn on 5V since all components are running on 3.3V.
What's included: Antennas (1x 2.4Ghz), 3D Printed Case and Mini.
3D printed using PETG in a Bambu Labs X1-Carbon.
Flipper Zero is not included
Do NOT unplug modules that are in use
You will need applications/firmware (Such as Momentum, Unleashed, RogueMaster or Xtreme) to support marauder on your Flipper Zero.
Disclaimer:
By purchasing, you understand all the following disclaimers: You are responsible for following all laws and regulations in your jurisdiction. Device case is 3D-printed in PETG, so there may be slight variations.
